HUB5000 - Roasting Intelligence (RI) Setup (Beta)
This manual covers hardware connection, software installation and hardware setup of Cropster’s Roasting Intelligence for a wireless, or (Ethernet) cable connection to a HUB5000.
Table of Contents
The credit for the pictures and media found in this article goes to Phidgets.
The media can be referred to, directly from https://www.phidgets.com/, under the Wireless VINT Hub product's Description and User Guide.
Legal Note
Please read this installation and configuration guide carefully, as any mishandling could lead to permanent device damage.
By connecting a Phidget device or temperature probe to any computer or by installing Cropster’s Roasting Intelligence (RI) software, the user agrees to release Cropster from any liability and assumes any possible risk related to the use of this measuring device and/or software. Cropster's terms of service apply.
Cropster cannot advise on the installation of the hardware, and to ensure safety when installing any hardware on your machine, Cropster recommends consulting with a technician who can help with the installation.
Specifications
Requirements
- Wireless VINT Hub (HUB 5000_0)
- VINT device (e.g. TMP1100, TMP1101, TMP1200, etc.)
- Phidgets cables (i.e. 3002_0, 3003_0, 3004_0)
There are various types of Phidget cables available for the connection.
Installing the Phidget driver
Before you can use your Phidgets, you will need to install the Phidget Control Panel from: https://www.phidgets.com/docs/Phidgets_Drivers
Connecting the Hub to a Network

The HUB5000 (e.g, Wireless VINT Hub) has the capability for a wired or wireless connection. To start, make sure to connect the following items to the HUB5000:
- Power jack
- VINT Device(s)
-
(optional) Ethernet cable for a connection with...
- A network router/switch.
- Your computer's Ethernet port
When you connect the power supply to the HUB5000, the red LED should turn on.

Proceed with:
- Connecting to the Wireless Network, if you are connecting wirelessly.
- Connecting via Ethernet, if you are connecting via Ethernet cable.
Connecting to the Wireless Network
- Access your device's Wi-Fi settings.
-
Connect to the Phidget's Network (e.g., Phidgets_HUB5000_XXXXXX).
This picture shows the available HUB5000's network, done via a Mac computer's Network interface.
-
Enter the password printed on the HUB5000's label, and submit it to connect to the network. You will lose Wi-Fi access until you finalize the steps in this section.
On the left, find the HUB5000's label, containing the password, amongst other information. On the right, find a Mac's network interface.
-
Access the Phidgets Configuration by going to your web browser (e.g., Google Chrome), and typing your HUB5000's IP address or hostname in the URL address bar.
- IP address
- Hostname in the form http://<hostname>.local/
-
If you are accessing the Phidget's Configuration page for the first time, you are prompted to set a password. Enter a desired password twice and click the Submit button. You will be redirected to the Status tab.
Important: Remember this password, as you'll need it to access the Phidgets Configuration from now on. -
Go to the Network tab, and configure the Wireless Settings.
-
Set the Wireless Mode to Client.
-
Next to Networks, click the Scan button, and wait a few seconds.
-
Click the Networks drop-down menu, and select your Wi-Fi network. This will autofill the network's Name and Security information.
HUB5000 can not be connected to a hidden network (SSID). -
Enter your Wi-Fi Network's password.
The password is the same password you use to connect to your WiFi network.
-
Set the Wireless Mode to Client.
-
Click Save & Apply, then click OK to dismiss the warning.
- Proceed with identifying the IP address.
-
It might take a few minutes for your Phidgets devices to be “connected”. Once the VINT Hub is recognized as connected, it will appear in the Phidget Control Panel.
Connecting via Ethernet cable
-
Access the Phidgets Configuration by going to your web browser (e.g., Google Chrome), and typing your HUB5000's IP address or hostname in the URL address bar.
- IP address
- Hostname in the form http://<hostname>.local/
-
Input a password for the Phidget's Configuration page, and click the Submit button. You will be redirected to the Status tab.
Remember this password, as you'll need it to access the Phidgets Configuration from now on. -
Once logged in, to the Phidgets Configure page, navigate to the Network tab.
- Follow the instructions, based on whether the VINT Hub...
Connecting to a network switch/router
- From the Network tab, set the IPv4 Mode to DHCP.
- Proceed with identifying the IP address.
Connecting directly to the computer
- From the Network tab, set the IPv4 Mode to Static.
-
Enter the following Ethernet settings:
- IP address: 10.0.1.199
- Subnet Mask: 255.255.255.0
-
Under Ethernet Settings, click Save & Apply
- Continue to Setting a Static IP address.
Setting a Static IP address
If you are connecting the VINT Hub via Ethernet cable, directly to the computer, please set a Static IP address (e.g., 10.1.0.42), based on the connected VINT Hub's IP address (e.g., 10.1.0.199).
Continue to Roasting Intelligence (RI) Setup.
Identifying the IP address
-
Access the Phidgets Configuration by going to your web browser (e.g. Google Chrome), and typing your HUB5000's hostname in the form http://<hostname>.local/ in the URL address bar:
-
If you are not yet logged in, you will need to enter your password.
-
From the Status tab, refer to the IP address under the Network section.
Once you've identified the IP address, remember it, as you will need it when establishing a connection to the machine. - Proceed with the Roasting Intelligence (RI) Setup.
Roasting Intelligence (RI) Setup
Please follow the instructions outlined in our setup articles to learn more about the Phidget's physical connection and configuration on the RI.
Please identify the setup article for your Phidgets setup, to continue with the setup instructions:
Phidgets hardware | Physical connection | Connector (from Machine configuration tab) | Setup article link |
TMP1101 | ![]() |
![]() |
Link |
TMP1100 | ![]() |
![]()
|
Link |
TMP1200 | ![]() |
![]()
|
Link |
Phidgets 1136/1137/1138 | ![]() |
![]()
|
Link |
Mac only:
Upon configuring your VINT Hub's connection and saving, the RI will need a restart to apply the settings.
Upon the restart, allow the following warning:

Congratulations! You have successfully set up the Cropster Roasting Intelligence.
Your opinion matters. If you have further questions, feedback, or concerns, please submit a support ticket directly from support.cropster.com.