Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Cropster Support
English (US)
US English (US)
DE German
  • Home
  • Connecting your roast machine
  • Temperature sensors

Probat BRZ - Installing a new probe for Cropster

This article explains the probe replacement procedure on a Probat BRZ sample roaster.

Written by Nikolett Takacs

Updated at July 30th, 2025

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Getting started
    Origin & Lab Roast
  • Connecting your roast machine
    General information Plug&Play connectors Alternative connection options Sample & Multi-barrel roasters Temperature sensors Drivers
  • Roasting Intelligence (RI)
    Roasting Intelligence (RI) Setup Customization and Preferences FAQs Roasting Intelligence (RI) App Artificial Intelligence (AI)
  • Using Cropster
    Post-Harvest Processing (Origin) Day to Day Operations Inventory Management Sample Management Roasting Order and Production Management Quality Control Reporting Sharing & Exporting Cropster Data
  • Cafe
    Getting Started Espresso machine connection Operations Cafe Telemetry Cafe Inventory Recipe Management Assets Management Troubleshooting
  • Commerce
    Getting Started Product Management Order Management Inventory Management Reporting Troubleshooting
  • Account & Administration
    General Account Management Roast Account Management Commerce Account Management General User Management Roast User Management
  • Troubleshooting
    General Roasting Intelligence (RI) Roast machine connections
+ More

Table of Contents

Specifications Requirements Supported measurements Temperature sensor installation Locating and removing the existing temperature sensor Bending the probe Installing the new probe

 

Legal Note

Please read this installation and configuration guide carefully as any mishandling could lead to permanent device damage.

By connecting a Cropster Connector or temperature probe to any computer or by installing Cropster’s Roasting Intelligence (RI) software, the user agrees to release Cropster from any liability and assumes any possible risk related to the use of this measuring device and/or software. Cropster's terms of service apply.

Cropster explicitly does not recommend the hardware connection process outlined in this manual.

Should you still wish to proceed with the outlined process in this manual, please reach out to a certified roast machine technician to consult and assist you further.

 

 

Specifications

Requirements

  • Ungrounded, digital thermocouple (Type K or J)
  • Wrench (size 8)
  • Pliers and a cloth (to bend the probe)

 

We highly recommend using a bendable probe. 
Below are some appropriate options:
  • EUR Only: Thermocouple K-Type (single) 200 - Bendable - Rugged Transition Joint
  • Other: Thermocouple Probes with PFA Insulated Lead Wire
 


Supported measurements

  • Bean temperature


Temperature sensor installation

Probat BRZ sample roasters come with analog temperature sensors. To connect the Probat BRZ sample roaster to Cropster, you need to:

  1. Locate and remove the existing temperature sensor
  2. Bend the probe
  3. Install the new probe


Locating and removing the existing temperature sensor

  1. Lift the barrel to make the rear accessible.
  2. Locate the temperature probe.
  3. Using the wrench, loosen the screw that fixes the probe.
  4. Take out the probe.


Bending the probe

Before you can install the new probe, you need to bend it in a manner that it fits into the existing probe hole.

  1. Refer to the Probat BRZ's default probe - the new probe will need to be bent to the same shape as the original probe.
    The new probe needs to fit through the port at the rear of the drum.
  2. Put a cloth (we’ve used a work glove) around the probe's section you are looking to bend. 
  3. Bend the probe carefully to the same extent as the original probe with the help of pliers.
  4. You can make fine adjustments to the angle afterwards with your hands.
  5. Repeat the procedure until the new probe matches the form of the original probe. 


Installing the new probe

  1. Insert the probe into the port at the rear of the drum until you reach the three drum arms inside the drum.
  2. Make sure the probe is not touching the drum's arms from inside the drum.
  3. Rotate the drum and listen for the probe hitting any part of the drum. If the probe does hit the drum, then look inside the drum to see where the probe is hitting and adjust the probe's position away from the contact point.
    Repeat this step until the probes no longer hit any part of the drum, not even slightly.
  4. Depending on the length of the probe, you may bend the part of the probe outside the drum, so the probe cable is bent downwards when putting the drums back in their original position.
  5. Once you are happy with the position and have made sure the probe is not touching the drum arms when they rotate, fixate the probe by tightening the screw securing it. 

 

Now it is time to connect the new probe to the Cropster Connector (Phidget 1048)! 
See the Multi-Barrel Lab Roasters - Roasting Intelligence (RI) Setup.

 

Congratulations! You have successfully replaced the probe on a Probat BRZ sample roaster.

Your opinion matters. If you have further questions, feedback, or concerns, please submit a support ticket directly from support.cropster.com. 

 
probe installation cropster compatibility

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • How to install an independent probe for Cropster
  • How to isolate a temperature probe
  • Maximum length of thermocouple wire

Contact

USA: +1 916-550-1682

(MON – FRI 8 AM – 5 PM PST)

Contact Us

  • Download Roast Intelligence
  • Create SLIC QR-Code
  • Scan SLIC QR-Code
  • Connect your Roast Machine
  • Sign up for RMM Beta Program
  • About Us
  • Careers
  • Contact
  • Partners
  • Privacy
  • Legal Notice
  • Terms of Service
  • EU Whistleblowing directive
  • Create a Support Ticket
  • Cropster Helpdesk
  • Cropster System Status
  • Product Updates
Expand