Overview 

This article will explain how to reset your BrewBeacon.
The reasons for resetting a BrewBeacon can generally be grouped into three main categories: 

1. Troubleshooting & error resolution: These resets are typically performed when the device is behaving unexpectedly or has encountered a system fault.
2. Configuration changes: These resets are usually necessary to apply significant changes to the device's internal settings.
3.  Network & connectivity issues: These resets address problems related to how the BrewBeacon interacts with the local network or the internet.

Instructions

There are two reset options available: 

1. Soft reset: It erases the WiFi password, protecting the device's access point. 
2. Factory reset: It erases all user data from the device (including WiFi credentials, Cropster Cafe pairing credentials, and Brew data). 

By following the steps below, you can reset the BrewBeacon: 

1. Press and hold the Reset button for a specific amount of time. 
2. Press the Reset button, and LED1 starts flashing while LED2 turns on. 

The table describes the following:

• The hold times
• The LED states
•  The resulting action if the Reset button is released in the corresponding phase.

If you have further questions, feedback, or concerns, please submit a support ticket directly from support.cropster.com.