Air-Motion Roasters - Roasting Intelligence (RI) Setup
This manual explains how to connect the Air-Motion Roasters machine via USB to Cropster's Roasting Intelligence.
Table of Contents
If you are using the TC4 Protocol, you should reach out to Air-Motion Roasters for assistance in updating their firmware to the Modbus RTU version.
Specifications
Requirements
- USB cable
- FTDI Driver
The driver may already be pre-installed with your operating system.
Supported measurements
- Bean temperature
- Exhaust temperature
Roasting Intelligence (RI) Setup
Installing the Roasting Intelligence (RI) software
- Download RI.
- Complete the installation process by following the steps provided.
- Double-click the Cropster icon on your desktop to access RI.
-
Click the green Login with the browser button.
.webp)
-
You will be directed to the C-sar browser.
.webp)
-
Enter your Username* and Password* and click the green Sign in with password button.
Use the same credentials that you use to access the online platform C-sar.
Establishing a connection to the machine
The images below are for reference and may vary slightly from your screen.
Before you begin configuring your roast machine, ensure that you have added it via the online platform C-sar.
- Select
Preferences > Machine > Configuration - To choose the Roast machine, click on the dropdown menu in the Machine section.
- Click the + Add connector option to choose your connector from the dropdown list.
- Select Generic Modbus over serial port from the dropdown.
-
Click Select to add the connector.
.webp)
- Navigate to the Machine > Measurements tab. All supported measurements will be displayed.
- To activate the measurements, simply click the green toggle button.
- Enable the desired measurements and choose Generic Modbus over serial port as the connector type.
-
(Optional) Change the order of the measurements by using the
-png.webp)
Drag and Drop icon and move it into position.
- Navigate to the Machine > Configuration tab and click on the Gear icon in the Connector setup section to open and configure more settings.
- Select the Serial port.
Operation System |
Serial port |
Windows |
COMx |
macOS |
USBx |
-
Copy the settings as shown in the screenshot below:
- Choose the temperature unit that corresponds to your machine setup: either Celsius or Fahrenheit.
- Click OK.
- Click Save to finalize the changes.
After saving the changes, RI will automatically restart. If the setup was successful, you will see the temperature values displayed on the right-hand side of the RI screen following the restart.
.webp)
Learn more about the Roasting Intelligence (RI) Preferences.
Troubleshooting
If RI indicates No source connected and/or you cannot see any measurements, please check the following:
- Is the roast machine connected to the computer?
- Have you downloaded the driver for the USB serial converter?
- Is the correct serial port within the RI selected?
If you have selected a serial port from the RI, and you receive Sources connected from the bottom-right corner of RI, but you can't see live temperature readouts, you may not have selected the serial port referring to the roast machine's connection.
Driver for the USB serial converter
If you cannot select the correct serial port within the RI's Serial port field, your computer may not have the appropriate driver needed to recognize the serial converter's physical connection.
Please reach out to support.cropster.com, and attach the following information relevant to the USB serial converter used:
- Brand and model
- Serial number
- Picture of the serial converter
- RI log files
A Cropster representative will assess the information and assist in providing the required driver for the USB serial converter used.
Congratulations! You have successfully set up the Cropster Roasting Intelligence.
Your opinion matters. If you have further questions, feedback, or concerns, please submit a support ticket directly from support.cropster.com.