How to set the Rate of Rise (RoR) within Roasting Intelligence (RI)

This article will explain what is Rate of Rise (RoR), how to enable and disable the RoR for the measurements and also how to reset the Rate of Rise (RoR).

• What is the Rate of Rise (RoR)?
• The Rate of Rise (RoR) setup

  • Disable/enable RoR for the measurements

• Troubleshooting

What is the Rate of Rise (RoR)?

The Rate of Rise (RoR) is the speed at which the temperature of your beans is increasing.

It’s measured over a specific period of time, usually between 30 or 60 seconds. 

The Rate of Rise (RoR) setup

By following the steps below you can set up the Rate of Rise (RoR) within RI: 

1. Log in to Roasting Intelligence (RI).
2. Navigate to the  Preferences on the bottom left side of the screen. 
3. Select Roasting > Rate of Rise (RoR).
   
4. Choose between Recommended, Sensitive, Noise smoothing, then select your preferred Time expression unit.
5. Click Save to apply the changes. 

Disable/enable RoR for the measurements

By following the steps below you can enable/disable the Rate of Rise (RoR): 

1. Log in to Roasting Intelligence (RI).
2. Navigate to the  Preferences on the bottom left side of the screen. 
3. Select Machine > Configuration. 
4. Scroll down to the Measurements section. 
5. Click on the respective checkbox next to Rate of Rise at the measurement you would like to enable RoR. 
   
6. Click Save to apply the changes.

Troubleshooting

The issue

The Rate of Rise (RoR) has been turned on, but it still does not display from your chart mid-roast.

The solution

You need to reset RoR to its default ranges by following the steps below: 

1. Log in to the Roasting Intelligence (RI).
2. Navigate to the  Preferences on the bottom left side of the screen. 
3. Select Roasting > Charts and comments.
   
4. Click the Reset chart axes button.
5. Click Save to apply the changes.

Related content

• What's the best Rate of Rise (RoR) for you?

Congratulations! You are now ready to set the Rate of Rise (RoR) within the Roasting Intelligence (RI)

Your opinion matters. If you have further questions, feedback, or concerns, please feel free to reach out by submitting a support ticket directly from support.cropster.com.